Mimosa B11 10.0-11.7 GHz Gigabit Backhaul, up to 1.5Gbps Aggregate
|Max Throughput||Up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY)|
|Low Latency||2+ ms|
|Wireless Protocols||TDMA, TDMA-FD|
|MIMO & Modulation||4x4:4 MIMO OFDM up to 256QAM|
|Bandwidth||Single or Dual 20/40/80 MHz channels|
|Frequency Range||10000-11700 MHz restricted by country of operation|
|Max Output Power||20 dBm (2-stream), 27 dBm (4-stream)|
|Sensitivity ( MCS 0 )||-87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz|
|Max Powe Consumptionr||30W|
|System Power Method||48 V DC 802.3 at compliant power injectors|
|System Lightning & ESD Protection||6 Kv|
|PoE Power Supply||Passive POE compliant, 48-56 V Power over Ethernet supply with IEC6|
|Dimensions||Height: 260 mm (10.2") Width: 158 mm (9.6") Depth: 70 mm (2.8")|
|Weight||2 kg (4.5 lbs)|
|Enclosure Characteristics||Outdoor UV stabilized plastic Aluminum mounting panel|
|Wind Survivability||200 km/h (125 mph)|
|Wind Loading||9.89 Kg @ 160 km/h (21.8 lbs @ 100 mph)|
|Mounting||Circular Waveguide fed mounting bracket direct into antenna Optional Data Connector SFP Cage|
|Outdoor Ingress Protection Rating||IP67|
|Operating Temperature||-40°C to +55°C (-40°F to 131°F)|
|Operating Humidity||5 to 100% condensing|
|Operating Altitude||4420 m (14500') maximum|
|Shock & Vibration||ETS 300-019-2-4 class 4M5|
|Dual Protocol Operation||2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM|
|Management Services||Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI 2.4 GHz 802.11b/g/n radio for local management access Smart Antenna Alignment Hands-free dedicated 2.4 GHz Wi-Fi management radio alignment tool|
|Smart Spectrum Management||Active scan monitors/logs ongoing RF interference across channels (no service impact) Dynamic auto-optimization of channel and bandwidth use|
|Security||128-bit AES PSK with hardware acceleration|
|QoS||Supports 4 pre-configured QoS levels|
|Colocation Synchronization||1PPS GPS TX/RX synchronization for colocated co-channel radios Adjustable up/downstream bandwidth ratio|
|GPS Location||GNSS-1 (GPS + GLONASS)|
Regulatory + Compliance
|Approvals*||FCC Part 101 and EN 302 217-2-2|
|Safety||UL/EC/EN/ 60950-1 + CSA-22.2|
10.0-11.7 GHz Gigabit Backhaul
Up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY)
Mimosa’s B11 backhaul radio is designed for the modern Internet era, adapting instantly to variable upstream and downstream bandwidth requirements, at the lowest cost per Mbps in the industry.
Aggregate Speed: 1.5 Gbps
Round Trip Latency: < 1 ms
Link Distances: 100+km
Just Add Fiber
Fiber to wireless is the future of connectivity, and the B11 is ready for it. Simply add your preferred SFP module and you’ll be lit up with gigabit fiber speeds. If you’re not quite ready for fiber, the B11 is still for you with a standard Gigabit Power-over-Ethernet connection.
Bandwidth Changes like Night & Day
Nighttime streaming video has driven downstream traffic to peak at nearly 90% of consumption, while daytime symmetric traffic is as critical as ever to businesses. Legacy FDD radios are limited to symmetric traffic usage, leaving vast amounts of spectrum constantly underutilized. The B11, however, can dynamically adapt to bandwidth demand using Auto-TDMA technology, maximizing spectrum utilization throughout the day.
Precision Engineered for Reliability
Licensed spectrum has always increased link reliability, but at great expense and with limited bandwidth flexibility. Our precision engineering of the B11 provides groundbreaking bandwidth control, spectrum efficiency and incredible industry leading stability.
IP67 Out of the Box
The B11 is ready to withstand the elements right out of the box. It comes with an Ethernet and SFP* cage IP67 sealing gland, designed specifically for sealing pre-terminated cables.
Revolutionary FCC Licensing
Obtaining an FCC license is traditionally an archaic, unpredictable process, exacerbated by microwave radios that support only a small fraction of the 10.7-11.7 GHz band.
For the first time in the industry, we radically simplified the licensing process, providing instant visibility into the FCC ULS database to quickly assess the surrounding links. We call this “pre-coordination,” giving you an early indication of coordination viability. We’ve also partnered with well-known license coordination experts to deliver low cost coordination services. Taking it one step further, our single B11 radio can support the entire 10.7-11.7 GHz band, maximizing your ability to find a clear, licensable channel.
Right on Target
In the past, aiming your antenna to find the best signal has been more art than science. We’ve taken the guesswork out of antenna aiming by adding 2.4 GHz Wi-Fi right in the radio, turning any smartphone into the most sophisticated aiming tool on the planet! Now installers can instantaneously view radio details, and target signal levels with the most precise aiming technology available in the industry.